Baseus Power Bank Power Starter Jump Starter Booster 10000mAh 12V (1000A / 500A) + Crocodile Cables Black (CGNL020101)

Baseus Power Bank Power Starter Jump Starter Booster 10000mAh 12V (1000A / 500A) + Crocodile Cables Black (CGNL020101)

Need a reliable jump starter that will free you from the rigors of roadside assistance and allow you to jump-start your car in the cold? A dead battery doesn't have to be a problem with your own Baseus jump starter. This device boasts excellent performance, reaching up to 1000A of peak current. Powerful enough to jump-start your car up to 50 times on a single charge! Efficient, safe, handy, and intuitive to use, this jump starter should be a must-have in every garage!

Specification

• Brand: Baseus
• Model: BS-CH001
• Capacity: 10000mAh/3.7V/37Wh
• Input: 5V/2.4A [Max]
• USB output: 5V/2.4A [Max]
• Starting voltage: 12V
• Starting current: 500A
• Peak current: 1000A
• Weight: 470g

The set includes

• 1 x starter
• 1 x Type-C cable
• 1 x Smart Ignition Clamp

Key features

• It achieves a very high peak current of 1000A and a starting current of 500A.
• High-performance polymer battery cells are resistant to very low and high temperatures.
• Very low power consumption in standby mode. It can retain up to 85% of its stored energy after a year of non-use after the last full charge.
• Built-in safeguards to prevent damage to connected devices.
• The set includes alligator clips for connection to the battery and a USB - USB Type C cable.
• A peak current of 1000 A allows you to start your car immediately
• Fits many vehicles with 12V batteries
• Works without any problems at very low and high temperatures
• Up to 50 starts on one charge
• Power bank for charging your phone
• 9 levels of security.
• Built-in LEDs can be used as a flashlight

Safety is a priority. Therefore, when it comes to pacemaker operation, using a Baseus model allows for stable, trouble-free use of the device, thanks to built-in functions:

1. Top-quality lithium-polymer batteries
2. Overcharge protection
3. Voltage stabilization
4. Protection against electric shock
5. Short circuit protection
6. Over-discharge protection
7. Reverse connection protection
8. Overheating protection
9. Overcurrent protection

Due to its size and technical parameters, the device can be taken on board an airplane.

How to properly start your car with a jump starter? 3 steps:

1. Connect . Insert the smart ignition terminals into the starter's EC5 interface – the connection status is indicated by flashing red and green lights.
2. Clamp . Raise the hood. Connect the cables – the positive (red) to the battery clamp marked plus and the negative (black) to the negative terminal on the battery.
3. Start the car . Return to the vehicle and start the car. Before driving, remove the starter motor from the battery.