Tech-Protect Glass UV+ 2-pack tempered glass Motorola Edge 60 Pro - transparent

Tech-Protect Glass UV is the highest quality tempered glass that provides exceptional protection for your device's screen. Thanks to UV application technology, the glass adheres perfectly to the surface, eliminating air bubbles and ensuring complete transparency and touch sensitivity.

9H hardness effectively protects the screen against scratches, impacts and other mechanical damage, and a special UV-cured adhesive guarantees a perfect fit and stability, even on curved screens.

The glass provides full screen coverage, from edge to edge, without affecting image quality or color reproduction, and its smooth surface allows the touchscreen to remain fully responsive.

Tech-Protect Glass UV is the perfect solution for those looking for reliable screen protection while maintaining the aesthetics and functionality of their device.

* We do not recommend using 3D glass without any housing.
** We do not recommend using glass if the case overlaps the edges of the screen too much, there is a risk of prying it off.
***The functionality of the in-screen fingerprint reader may be slightly impaired if a protective film or glass coating is installed. The fingerprint reader is not fully compatible with additional coatings.

INSTALLATION INSTRUCTIONS:
1) Start the installation in the bathroom right after taking a bath - the water vapor will absorb all the dust from the atmosphere and it will not interfere with the installation.
2) Thoroughly clean and degrease the screen surface, then polish it to a shine with a dry cloth.
3) Use the tape from the kit to seal the speaker.
4) Connect the UV lamp to a power source using the Type-C cable.
5) Pour the liquid into the center of the device.
6) Install the glass as evenly as you can, you can also correct this step before the surface hardens when the liquid is on the screen together with the glass.
7) If an air bubble appears, use a bank card and gently push it out of the glass, this step is done before hardening.
8) Using a UV lamp, harden the glass along the center in five places for 15 seconds each and then around the edges for 10 seconds each.
9) Clean the phone of any remaining hardened glue.
10) If your device has a fingerprint reader in the screen, remember to remove and re-add your fingerprints after installing the glass on the screen.
11) Enjoy a job well done!

PRODUCT FEATURES:
- 100% Original
- Packed in original packaging
- 0.3mm thick tempered glass
- Scratch resistance 9H
- Equipped with an oleophobic coating
- Leaves no trace after disassembly
- Dimensions: 156 x 71 mm

THE SET INCLUDES:
2 x Tech-Protect Glass Glass UV
1 x UV Lamp (without Type-C cable)
2 x Tube of glue
2 x Installation kit